H.R. 600 Slver High Temperature Heat Resistant Coating is used as heat resistant coating suitable upto 600 degrees Celsius.

It is being used by major industries for ovens and furnaces

It is suggested mainly for continuous temperatures between 250 and 550 degrees Celsius.

This is having silver colour and is widely used in industries for Furnaces, chimney paintings and exhaust pipes painting.

This special coating is generally for exterior of furnaces to achieve proper heat despation of exterior surface thereby providing increase life of furnace.

This coating is applied for protection of primer as well as aesthetic look to the surface.

The application procedure of heat resist 600 Silver is very easy.

It can be applied by brush/spray after mixing it well and thinned down to application viscosity if required.

Usually it does not need any primer but in highly corrosive environment,zinc silicate base primer is advised.

The previously applied coating should be removed from the surface bypaint stripper.

The paint stripper should be applied to the surface and left for few minutes till the paint starts lifting from the surface.

Then the surface should be scraped lightly with the help of emery paper.

The surface should then be cleaned by thinner followed by application of one coat of heat resist 600 Silver.

The surface should be air-dried for four hours.

It will be cured when taken in actual use